Models

Showing 1–24 of 178 results

grid-view list-view
  • Apollo 11 Command Module CSM with Lunar Module Metal Earth Steel Model Kit NEW

    This amazingly detailed model starts as three and a half 4″ square sheet and finishes as a 3-D model. The Apollo 11 moon landing required two spacecraft- The lunar module (LM) and command service module (CSM). Once in lunar orbit, the two would separate so the LM could land while the CSM waited in orbit. After launching from the lunar surface, the LM’s ascent stage would rendezvous and dock with the waiting CSM, then the astronauts would transfer back into the main spacecraft and head home. It sounds nearly impossible but that’s the way it was July 20, 1969. This model includes a golden plaque to commemorate the 50th anniversary of Apollo 11. The sheets contain detailed laser etching for easy removal and when completed measures 5.07″ x 2.28″ x 3.45″ with challenging difficulty. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 60-75 minutes. It has been stored in a smoke and pet free environment. We also offer an optional LED base (white or blue lights) or a Solar Powered Spinner for better display of your model.

    SKU: MI-MDFITMMS168 Categories: , Tag:
    $15.95
  • Apollo 11 Lunar Module Metal Earth Steel Model Kit NEW SEALED

    This amazingly detailed model starts as two 4″ square sheet and finishes as a 3-D model. This was a two part spacecraft used to carry a crew of two from lunar orbit to the surface of the moon and back. The descent stage served as the launch pad for the ascent stage plus it housed the landing gear, engines and fuel needed for landing. Six such craft successfully landed on the Moon between 1969 and 1972. The sheets contain detailed laser etching for easy removal and when completed measures 2.34″ x 2.34″ x 2.15″ with moderate difficulty. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 30-45 minutes. It has been stored in a smoke and pet free environment. We also offer an optional LED base (white or blue lights) or a Solar Powered Spinner for better display of your model.

    SKU: MI-MDFITMMS078 Categories: , Tag:
    $9.95
  • Apollo Space Program Lunar Rover Metal Earth Steel Model Kit NEW SEALED

    This amazingly detailed model starts as two 4″ square sheet and finishes as a 3-D model. This was affectionately known as the moon buggy. It was used on the moon in the last three missions of the American Apollo program (15, 16, 17) during 1971 and 1972. Powered by only two silver-oxide batteries, the Apollo 17 was able to drive for 35.74 km (22.21 miles) across the surface of the moon. The sheets contain detailed laser etching for easy removal and when completed measures 3.54″ x 1.77″ x 2.28″ with moderate difficulty. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 30-45 minutes. It has been stored in a smoke and pet free environment. We also offer an optional LED base (white or blue lights) or a Solar Powered Spinner for better display of your model.

    SKU: MI-MDFITMMS094 Categories: , Tag:
    $9.95
  • Aquaman Movie Trident on Base 3D Laser Cut Wood Model and Deluxe Book NEW SEALED

    Immerse yourself in the underwater kingdom of Atlantis with this wood model set inspired by the 2018 film Aquaman. The deluxe 32-page hardcover book is packed with information on the DC Super Hero, as well as his family, friends, and enemies from his first solo big screen adventure. Complete with stunning art and photography, this book and model set is a must-have for comic book and movie fans. The wood model is easy to assemble and snaps together to form a dynamic, displayable 3D version of the Trident on a carefully crafted Atlantean base. This is a new and unused kit stored in a smoke and pet free environment.

    Page Count: 32

    Number of Pieces: 21

    Age: 12+

    Skill Level: Advanced

    Dimensions of fully built model: 6.22″ x 2.44″ x 8.26″. It has been stored in a smoke and pet free environment. We also offer an optional LED base or a Solar Powered Spinner for better display of your model.

    We are adding hundreds of new items every month so check back often for additional toys, models and other Aquaman and DC Comics merchandise

    SKU: DC-MDISE818598021525 Categories: , Tag:
    $16.99
  • Asssassin’s Creed Movie Hidden Blade 3D Laser Cut Wood Model Kit NEW UNUSED

    This kit comes with everything needed to build a 3D wood model of the hidden blade from the Assassin’s Creed film. A saga that spans millennia, Assassin’s Creed tells the story of the eternal struggle between the Assassins and Templar. This deluxe kit includes a 3D hidden blade wood model that fans can build and customize. Fun and interactive, this exciting model set is the perfect gift for fans everywhere.

    Age: 12+

    Skill Level: Easy

    Pieces: 12

    Dimensions of fully built model: 2.48″ x .39″ x 8.46″. . We also offer an optional LED base or a Solar Powered Spinner for better display of your model.

    SKU: GA-MDISE9781682980385 Categories: , Tag:
    $16.99
  • Avengers Infinity Gauntlet 3D Laser Cut Wood Model and Deluxe Book NEW UNUSED

    The Infinity Stones grant their individual wielders immense power that can influence the very fabric of the universe. Now Marvel fans can gather all six Infinity Stones and build their own Infinity Gauntlet with this IncrediBuilds kit! The included 32-page book is packed with information on each Infinity Stone, from their initial emergence to their role throughout the Marvel Cinematic Universe. The wood model is easy to assemble and snaps together to form a dynamic, displayable 3D version of the Infinity Gauntlet.

    Page Count: 32

    Age: 12+

    Skill Level: Advanced

    Number of pieces: 394, inc. 11 spare

    Dimensions of fully built model: 2.3″ x 2.4″ x 4.5″. We also offer an optional LED base or a Solar Powered Spinner for better display of your model.

    SKU: AV-MDISE9781682981931 Categories: , Tag:
    $24.99
  • Batman 1989 Movie Batmobile Metal Earth 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as 4″ square sheets and finishes as a 3-D model. It is approximately 3.5″ x 1.3″ x 1.0 when assembled and this one features Batman’s famous Batmobile as seen in the 1989 Michael Keaton movie. The Batmobile is the Batman’s primary mode of transportation. The vehicle is one of the most daunting components in his vast arsenal, keeping it stored in the Batcave when not in use. Affectionately dubbed the “Keaton-mobile” after Michael Keaton; the actor playing Batman/Bruce Wayne in the films at the time, the car’s popularity with fans has established a strong following and easily ranks with the 1966 Batmobile as one of the most popular Batmobiles of all time. The sheets contain detailed laser etching for easy removal.

    SKU: BM-MDFIMMS372 Categories: , Tag:
    $11.99
  • Batman 1989 Movie Batwing Plane Metal Earth 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as 4″ square sheets and finishes as a 3-D model. It is approximately 2.7″ x 3.25″ x 1.6 when assembled and this one features Batman’s famous Batwing plane as seen in the 1989 Michael Keaton movie. The Batwing was Batman’s custom-built air combat vehicle. The craft was fully armed with miniguns and missiles. It is unknown where the vehicle was stored, but it was presumably kept somewhere near the grounds of Wayne Manor or in the Batcave. Although the notion of Batman possessing and flying a Bat-themed aircraft has been around in comics since 1939, the Batman 1989 film first introduced the classification of “Batwing”. The movie’s Batwing was also the first of any Bat-aircraft to be physically shaped after the bat-emblem to such a degree. The sheets contain detailed laser etching for easy removal.

    SKU: BM-MDFIMMS373 Categories: , Tag:
    $11.99
  • Batman Classic Rooftop Bat-Signal Metal Earth 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as 4″ square sheets and finishes as a 3-D model. It is approximately 1.75″ x 1.75″ x 2.4 when assembled and this one features Batman’s classic rooftop Bat-Signal use by Commissioner Gordon and others. The Bat-Signal is a distress signal device appearing in the various interpretations of the Batman mythos. It is a specially modified searchlight with a stylized symbol of a bat attached to the light so that it projects a large Bat emblem on the sky or buildings of Gotham City. In the stories, the signal is used by the Gotham City Police Department as a method of contacting and summoning Batman to their assistance in the event of a serious crisis and as a weapon of psychological intimidation to the numerous villains of Gotham City. The sheets contain detailed laser etching for easy removal.

    SKU: BM-MDFIMMS374 Categories: , Tag:
    $11.99
  • Batman Classic TV Series Batmobile Metal Earth 3-D Laser Cut Steel Model Kit #MMS371

    This amazingly detailed model starts as 4″ square sheets and finishes as a 3-D model. It is approximately 3.5″ x 1.3″ x 1.0 when assembled and this one features Batman’s famous Batmobile as seen in the 1960’s classic TV series. The 1966 Batmobile from the live action television show began life as a Ford concept car called the Lincoln Futura. The body of the Futura was fabricated by Ghia of Italy, whose artisans hammered the car’s panels over logs and tree stumps carved as forms to create the sleek manta ray-like car. The extra-large bat-trunk in the Batmobile holds various crime-fighting equipment and has plenty of space to fit eight people comfortably. The windshield is bulletproof. And of course, the Batmobile is not without its helpful gadgets including the nose-mounted chain slicer, lasers, rockets, an on-board telephone, radar, dash monitor, on-board computer, and police beacon, among others. The sheets contain detailed laser etching for easy removal.

    SKU: BM-MDFIMMS371 Categories: , Tag:
    $11.99
  • Batman V Superman Movie Bat-Signal Metal Earth 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as 4″ square sheets and finishes as a 3-D model. It is approximately 2.2″ x .578 x 2.328 when assembled and this one features Batman’s famous Bat-Signal as seen in the 2016 movie Batman V Superman Dawn of Justice. The Bat-Signal is the way for Gotham City to reach Batman or Batman to call out to the people of Gotham City.

    SKU: BM-MDFIMMS377 Categories: , Tag:
    $11.99
  • Batman V Superman Movie Batmobile Metal Earth 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as 4″ square sheets and finishes as a 3-D model. It is approximately 3.5″ x 1.3″ x 1.0 when assembled and this one features Batman’s famous Batmobile as seen in the 2016 movie Batman V Superman dawn of Justice. The Batmobile is the Batman’s primary mode of transportation. The vehicle is one of the most daunting components in his vast arsenal, keeping it stored in the Batcave when not in use.

    SKU: BM-MDFIMMS375 Categories: , Tag:
    $11.99
  • Batman V Superman Movie Batwing Metal Earth 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as 4″ square sheets and finishes as a 3-D model. It is approximately 3.62″ x 3.81″ x 1.73 when assembled and this one features Batman’s famous Batwing as seen in the 2016 movie Batman V Superman Dawn of Justice. The Batwing is the Batman’s primary mode of transportation when he has to travel far distances quickly.

    SKU: BM-MDFIMMS376 Categories: , Tag:
    $11.99
  • Blue Dragon Fantasy Metal Earth ICONX 3D Steel Model Kit #ICX114 NEW SEALED

    This amazingly detailed model kit starts as three 8.3″ x 4.3″ steel sheets and finishes as a 3-D model. It measures approximately 5.51″ x 4.92″ x 5.43″ high when assembled and this one features a blue dragon. Dragons are magical creatures from myth and legend. European dragons are featured as having large, reptilian bodies, with bat-like wings. Blue Dragons are said to be very territorial and associated with lightning. The sheets contain detailed laser etching for easy removal. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 60-90 minutes. It has been stored in a smoke and pet free environment. We also offer an optional LED base or a Solar Powered Spinner for better display of your models.

    SKU: SF-MFFIICX114 Category: Tag:
    $25.99
  • Chinese (Ming) Armor Metal Earth 3-D Laser Cut Steel Model Kit #MMS141 NEW

    This amazingly detailed model starts as two 4″ square sheets and finishes as a 3-D model. It is approximately 4.4″h x 2.2″w x 1.1″d when assembled and this one features a replica of traditional Chinese (Ming) armor. This model is an example of some of the most magnificent and iconic armor from ancient China. It was worn by the Dahan General, a group of some 1,500 guardians that belonged to the army of the secret service of the Ming Dynasty. Their task was to protect the emperor and the dynasty. The sheets contain detailed laser etching for easy removal. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 45-60 minutes for this moderate difficulty model. No glue needed. It has been stored in a smoke and pet free environment. We also offer an optional LED base or a Solar Powered Spinner for better display of your model.

    SKU: MI-MDFITMMS141 Category: Tag:
    $12.95
  • DC Comics Batman Figure Metal Earth Legends 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as a 4″ square sheet and finishes as a 3-D Caricature model. It is approximately 2.75″ tall when assembled and this one features Batman as seen in the comic books and movies. The sheet contain detailed laser etching for easy removal. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 30-45 minutes.

    SKU: BM-MDFIMEM021 Categories: , Tags: ,
    $10.99
  • DC Comics Cyborg Figure Metal Earth Legends 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as a 4″ square sheet and finishes as a 3-D Caricature model. It is approximately 2.75″ tall when assembled and this one features Cyborg as seen in the comic books. The sheet contain detailed laser etching for easy removal. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 30-45 minutes.

    SKU: DC-MDFIMEM023 Categories: , Tags: ,
    $10.99
  • DC Comics Green Lantern Figure Metal Earth Legends 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as a 4″ square sheet and finishes as a 3-D Caricature model. It is approximately 2.75″ tall when assembled and this one features Green Lantern as seen in the comic books and movies. The sheet contain detailed laser etching for easy removal. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 30-45 minutes.

    Categories: , Tags: ,
    $10.99
  • DC Comics Superman Figure Metal Earth Legends 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as a 4″ square sheet and finishes as a 3-D Caricature model. It is approximately 2.75″ tall when assembled and this one features Superman as seen in the comic books and movies. The sheet contain detailed laser etching for easy removal. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 30-45 minutes.

    SKU: SM-MDFIMEM024 Categories: , Tags: ,
    $10.99
  • DC Comics The Flash Figure Metal Earth Legends 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as a 4″ square sheet and finishes as a 3-D Caricature model. It is approximately 2.75″ tall when assembled and this one features The Flash as seen in the comic books TV and movies. The sheet contain detailed laser etching for easy removal. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 30-45 minutes.

    SKU: FL-MDFIMEM027 Categories: , Tags: ,
    $10.99
  • DC Comics The Joker Figure Metal Earth Legends 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as a 4″ square sheet and finishes as a 3-D Caricature model. It is approximately 2.75″ tall when assembled and this one features Batman’s nemesis The Joker as seen in the comic books and movies. The sheet contain detailed laser etching for easy removal. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 30-45 minutes.

    SKU: BM-MDFIMEM022 Categories: , Tags: ,
    $10.99
  • DC Comics Wonder Woman Figure Metal Earth Legends 3-D Laser Cut Steel Model Kit

    This amazingly detailed model starts as a 4″ square sheet and finishes as a 3-D Caricature model. It is approximately 2.75″ tall when assembled and this one features Wonder Woman as seen in the comic books and movies. The sheet contain detailed laser etching for easy removal. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 30-45 minutes.

    SKU: WW-MDFIMEM025 Categories: , Tags: ,
    $10.99
  • Delorean Car as Seen In Back to the Future Movie Metal Earth Steel Model Kit NEW

    This amazingly detailed model starts as two and a half 4″ square sheet and finishes as a 3-D model. Was produced for the American market by The DeLorean Motor Company in Belfast, Northern Ireland from 1981 to 1983. This sleek angular car featured gull-wing doors and an unpainted brushed stainless steel body. It was immortalized as the DeLorean time machine in the Back to the Future movie franchise. The sheets contain detailed laser etching for easy removal and when completed measures 3.5″ x 1.25″ x 1.15″ with challenging difficulty. Complete instructions are included to show you how to pop out the pieces, bend the tabs, and connect them at the attachment points with an average assembly time of 60-75 minutes. It has been stored in a smoke and pet free environment. We also offer an optional LED base (white or blue lights) or a Solar Powered Spinner for better display of your model.

    $13.95
  • Destiny Video Game Sparrow Vehicle Ship 3D Laser Cut Wood Model Kit NEW UNUSED

    In a universe filled with the Hive, Fallen, Vex, and Cabal, few vehicles can outmaneuver enemies like the Sparrow. Capable of high speeds and tight cornering, the land-based vehicle is personalized to each Guardian and stored in their jumpship. Customize your very own Sparrow with this replica model kit, matching your favorite color and style options from within in the Destiny universe. It is Eco friendly with no glue or tools needed.

    Age: 12+

    Skill Level: Expert

    Pieces: 182

    Dimensions of fully built model: 9.84″ x 3.9″ x 2.75″.  We also offer an optional LED base or a Solar Powered Spinner for better display of your model.

    SKU: GA-MDISE9781682980781 Categories: , Tag:
    $19.99